Vehicle Fitment Guide

2024 Chevrolet Trax

Complete wheel fitment specifications, compatible wheel sizes, and clearance guide

Stock Wheel Specifications

Tire Size
205/65R16
Bolt Pattern
5x105
Wheel Width
6.5 inches
Offset
+37mm
Wheel Diameter
16 inches
Hub Bore
56.6mm
Lug Nut Size
M12x1.5

Stock Wheel Specifications

The 2024 Chevrolet Trax comes with 205/65R16 tires on 6.5-inch wide wheels at a +37mm offset. This subcompact crossover is Chevrolet's entry-level SUV, redesigned for 2024. The bolt pattern is 5x105, specific to GM's small vehicle platform.

Compatible Wheel Sizes

Here are the general fitment guidelines for the 2024 Chevrolet Trax:

Wheel SizeTire SizeWidth RangeOffset RangeNotes
16 inches205/65R166.5-7.5"+30 to +45mmStock size, best comfort
17 inches215/55R177.0-8.0"+30 to +42mmMild upgrade, sportier look
18 inches225/45R187.0-8.0"+28 to +40mmMaximum visual upgrade
15 inches205/70R156.0-7.0"+35 to +45mmWinter/budget downsize

Popular Aftermarket Setups

Owners have developed several proven configurations:

Bolt Pattern Explained: 5x105 for the Trax

The 5x105 bolt pattern is used exclusively by GM on small-car platforms: Chevrolet Cruze, Sonic, and Buick Encore. More limited aftermarket than common patterns.

Cross-compatible vehicles with 5x105: Chevrolet Cruze, Chevrolet Sonic, Buick Encore, Buick Encore GX. GM-specific pattern.

Offset Guide for the 2024 Trax

Offset is the distance from the wheel's mounting face to the centerline. The Trax's stock offset of +37mm positions the wheel within the fender well.

Going more positive: Going more positive (+42mm or higher) keeps the wheel conservative inside the fender.

Going more negative: Going more negative (+28mm or lower) pushes the wheel outward. The compact body means even small changes are visually noticeable.

Safe range for 2024 Trax: +28mm to +45mm for all configurations. Tight clearances throughout.

Fender Clearance Notes

Stock clearance: Moderate. About 1.2 inches of clearance to the fender.

What fits without modifications: 215/55R17 or 225/50R17 fit without modifications.

What requires modification: The Trax is not a common modification platform. Stick to recommended sizes.

Use the WillItRub Calculator

Every vehicle varies based on suspension modifications, ride height, and manufacturing tolerances. Use the WillItRub calculator to verify your specific wheel and tire combination before purchase.

Try the Calculator

Frequently Asked Questions

Q: Can I fit 18-inch wheels on the Trax?

A: Yes. 18x7.5 +35mm with 225/45R18 fits without modifications. Largest practical size.

Q: What is the 5x105 bolt pattern?

A: 5 lug holes on a 105mm diameter circle. GM-specific, not compatible with 5x114.3 or 5x112.

Q: What hub bore for the Trax?

A: 56.6mm. Smaller hub bore, most aftermarket wheels need hub-centric rings.

Q: Will Chevy Cruze wheels fit the Trax?

A: Yes. Same 5x105 bolt pattern and 56.6mm hub bore. 16-17 inch Cruze wheels bolt directly on.

Q: What torque spec for Trax lug nuts?

A: M12x1.5 torqued to 130 Nm (96 lb-ft). Re-torque after 50-100 miles.

Contact: [email protected]

@helloinsolveo