Complete wheel fitment specifications, compatible wheel sizes, and clearance guide
The 2024 Infiniti G37 comes standard with 225/45R18 tires mounted on 8.0 inches-wide wheels with a +45mm offset. This setup is engineered for the G37's suspension geometry and provides adequate clearance to the fenders and suspension components at stock ride height. The bolt pattern is 5x114.3.
The 2024 G37 has good flexibility for wheel upgrades. You can typically go larger in diameter while maintaining a similar overall tire diameter for accurate speedometer readings. Here are the general guidelines:
| Wheel Size | Tire Size | Width Range | Offset Range | Notes |
|---|---|---|---|---|
| 18 inches | 225/45R18 | 8.0–8.5" | +40 to +50mm | Stock size |
| 19 inches | 235/40R19 | 8.5–9.0" | +40 to +50mm | Popular upgrade |
| 20 inches | 245/35R20 | 9.0–9.5" | +35 to +45mm | Requires lowering |
The G37 community has standardized around a few proven wheel setups. Here are the most common configurations:
The 5x114.3 bolt pattern means the G37 has the specified number of lug holes arranged in a circle. This pattern is shared across various vehicles, making wheel selection easier and more affordable.
Cross-compatible vehicles with 5x114.3: Nissan 370Z (offset dependent), Nissan Maxima, Nissan Altima, Acura TSX (offset dependent).
Do not assume a wheel fits another car just because they share a bolt pattern. Offset, hub bore, and width still matter. A wheel that fits perfectly on a G37 might stick out or tuck in oddly on another vehicle.
Offset is the distance from the wheel's mounting face to the centerline of the wheel. On the G37, stock offset is +45mm, which tucks the wheels nicely under the fenders without interfering with suspension components.
Going more positive (higher offset numbers): The wheel tucks further under the fender. You get a more conservative, stock appearance. On the G37, wheels with very high offset may appear sunken.
Going more negative (lower offset numbers): The wheel moves further outward. This creates a more aggressive, planted stance. On a stock-height G37, lower offset wheels will be closer to the fender. On lowered cars, you risk fender contact under compression or with aggressive driving.
Safe range for 2024 G37: Verify your specific model's clearance with the calculator before purchasing wheels.
G37 has a swooping fender line designed for aggressive fitments. Stock clearance is about 1.5 inches. Lower offset wheels look proportional.
Every car is different based on suspension mods, ride height, and individual manufacturing tolerances. Use the WillItRub calculator to verify your specific wheel and tire combination before purchase.
Try the CalculatorA: Both use 5x114.3, but hub bore differs (370Z is 66.1mm, some Nissans vary). Verify hub bore before purchasing.
A: 19x9.0 +40mm with 235/40R19 is the sweet spot. It looks aggressive, fits on stock suspension, and improves handling.
A: It's Infiniti-specific. Many aftermarket brands offer 5x114.3 in this size, but it's less common than 64.1mm.
A: Yes, significantly. Each 0.5-inch drop reduces clearance by roughly 0.3 inches. Offset becomes critical on lowered cars.
Contact: [email protected]