Complete wheel fitment specifications, compatible wheel sizes, and clearance guide
The 2024 Jeep Gladiator comes standard with 255/70R18 tires on 7.5-inch wide wheels at a +44mm offset. Jeep's mid-size pickup shares its platform with the Wrangler JL. The bolt pattern is 5x127 (5x5 inches), the modern Jeep standard.
Here are the general fitment guidelines for the 2024 Jeep Gladiator:
| Wheel Size | Tire Size | Width Range | Offset Range | Notes |
|---|---|---|---|---|
| 17 inches | 255/75R17 | 7.5-9.0" | +10 to +44mm | Off-road standard, tallest options |
| 18 inches | 255/70R18 | 7.5-9.0" | +10 to +44mm | Stock size, wide selection |
| 17 inches | 285/70R17 | 8.0-9.5" | -12 to +20mm | 33-inch off-road upgrade |
| 17 inches | 315/70R17 | 9.0-10.0" | -24 to +0mm | 35-inch, requires lift |
Owners have developed several proven configurations:
The 5x127 bolt pattern is the standard Jeep pattern used across the Wrangler JL, Grand Cherokee (some years), and Commander. Off-road aftermarket heavily supports this pattern.
Cross-compatible vehicles with 5x127: Jeep Wrangler JL/JK, Jeep Grand Cherokee (2011-2021), Jeep Commander. Always verify hub bore.
Offset is the distance from the wheel's mounting face to the centerline. The Gladiator's stock offset of +44mm positions the wheel within the fender well.
Going more positive: Going more positive (+35mm or higher) tucks the wheel for on-road stability and to pass width regulations.
Going more negative: Going more negative (0mm or below) pushes the wheel past the fender. Standard for lifted builds where wider stance improves stability.
Safe range for 2024 Gladiator: -24mm to +44mm depending on lift. Stock-height should stay +20mm or higher. Lifted (2.5+ inches) can run 0mm to -12mm.
Stock clearance: Moderate. About 1.3 inches of clearance, designed for light trail use.
What fits without modifications: 265/70R17 or 265/65R18 fit without lift or trimming.
What requires modification: 33s (285/70R17) need 2-inch lift. 35s need 2.5-3.5 inches plus trimming. 37s require extensive modification including regearing.
Every vehicle varies based on suspension modifications, ride height, and manufacturing tolerances. Use the WillItRub calculator to verify your specific wheel and tire combination before purchase.
Try the CalculatorA: Yes, with 2.5-3.5 inch lift and fender trimming. 315/70R17 on 17x9.0 -12mm is standard. Budget $3,000-5,000.
A: Yes. Same 5x127, 71.5mm hub bore, and offset specs. Completely interchangeable.
A: 71.5mm. Standard Jeep JL size. Many off-road wheels are designed specifically for it.
A: With 33s on the 3.6L V6, optional. With 35s or larger, regearing to 4.56 or 4.88 is strongly recommended.
A: M14x1.5 torqued to 130 Nm (96 lb-ft). Same as Wrangler JL.
Contact: [email protected]