Complete wheel fitment specifications, compatible wheel sizes, and clearance guide
The 2024 Nissan Frontier comes standard with 265/70R16 tires on 7.0-inch wide wheels at a +25mm offset. This mid-size truck platform balances daily driving with moderate off-road use. The bolt pattern is 6x114.3 (6x4.5 inches), specific to Nissan trucks.
Here are the general fitment guidelines for the 2024 Nissan Frontier:
| Wheel Size | Tire Size | Width Range | Offset Range | Notes |
|---|---|---|---|---|
| 16 inches | 265/70R16 | 7.0-8.0" | +15 to +30mm | Stock size, best off-road options |
| 17 inches | 265/65R17 | 7.5-8.5" | +15 to +30mm | PRO-4X upgrade |
| 18 inches | 275/60R18 | 8.0-9.0" | +10 to +25mm | Street upgrade |
| 20 inches | 275/55R20 | 8.5-9.5" | +5 to +20mm | Show look |
Owners have developed several proven configurations:
The 6x114.3 bolt pattern is uncommon but standard for Nissan's mid-size truck lineup including the previous-gen Frontier and Xterra.
Cross-compatible vehicles with 6x114.3: Nissan Xterra, Nissan Pathfinder (pre-2013), Suzuki Equator. Nissan-specific in the truck segment.
Offset is the distance from the wheel's mounting face to the centerline. The Frontier's stock offset of +25mm positions the wheel within the fender well.
Going more positive: Going more positive (+30mm or higher) tucks the wheel for a conservative appearance.
Going more negative: Going more negative (+10mm or lower) delivers an aggressive stance that pairs well with fender flares.
Safe range for 2024 Frontier: +5mm to +30mm for stock-height. Lifted Frontiers can go to 0mm.
Stock clearance: Moderate. About 1.5 inches of clearance, adequate but limiting for major upsizing.
What fits without modifications: 265/75R16 or 265/65R17 fit without modifications.
What requires modification: 285/75R16 requires a 2-inch leveling kit and fender liner trimming. A 3-inch lift opens 33-inch tire options.
Every vehicle varies based on suspension modifications, ride height, and manufacturing tolerances. Use the WillItRub calculator to verify your specific wheel and tire combination before purchase.
Try the CalculatorA: With a 3-inch lift and trimming, yes. A 285/75R16 is approximately 32.8 inches.
A: Yes. Same bolt pattern.
A: 66.1mm. Aftermarket wheels need hub-centric rings.
A: No. Titan uses 6x139.7. Different and incompatible.
A: M12x1.25 torqued to 118-147 Nm. Note the 1.25mm thread pitch is finer than most competitors.
Contact: [email protected]